KUPO

The Kupo 1/4"-20 D-Ring Screw is made with stainless steel and is ideal as replacement screws for quick release plates. It can be hand tightened us...

Kupo 1/4-20 D-ring Screws (x5)Kupo 1/4"-20 D-Ring Screws (Set of 5)- made with stainless steel. - hand tighten using the hinged D-ring or by using ...

Kupo Qr Monitor BracketEliminate the extra time and hassle of mounting a field monitor to your camera with the Kupo 1/4"-20 Quick Release Monitor B...

This is a small adapter that converts a 1/4"-20 female thread into a 1/4"-20 male thread.

17.5" Super viser clamp has a 5/8" spigot to mount lighting fixtures or grip accessories. Hexagonal receiver on the base to mount accessories that ...

The Kupo 2-1/2 Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V s...

The Kupo 2-1/2" Grip Head With Big Handle (Chrome Plated Finish) has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roll...

The Kupo Safety Wire is lightweight steel safety cable. It is 29.5" (75cm) long and has a diameter of 0.13" (3.5mm) with a load rating of 22lbs (10...

Kupo 20 Turtle Base KitThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still or mov...

Kupo 20 Turtle Base Kit SilverThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still...

The Kupo 20'' Extension Grip Arm with Baby Hex Pin (Black) has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip h...

Kupo 24" Baby Stand Extension adds that little bit extra height to your light stands, baby plates or any other baby pin that needs extending. These...

Kupo 3-way Clamp3 Way Clamp for 25mm to 35mm tube

The Kupo 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread can be used with a grip head or Kupo Convi Clamp attached to any accessory with fe...

The Kupo 3.5" Long 5/8" Baby Stud with 1/4"-20 Male Thread is a small accessory for a lighting grip kit. It offers a 1/4"-20 screw as its mounting ...

Kupo 3/8"-16 To 1/4"-20 AdaptrThis 3/8"-16 Male to 1/4"-20 Male Thread Adapter from Kupo is a small brass adapter that converts a 3/8"-16 female th...

Kupo 4-1/2 Grip Head W/ 1/8The 4-1/2" Grip Head KG400512 consists of a pair of rotating aluminum discs attached to a junior 1/8 (28mm) stud and rec...

Kupo 4 In 1 Nesting Apple BoxThe 4-In-1 Nesting Apple Box Set from Kupo includes full-, half-, quarter-, and pancake-sized apple boxes, all made of...

The 9.7' Kupo Aluminum Studio Roller Stand is designed to hold loads up to 33lbs with a folding base. The stand features aluminum sections, a black...

Kupo 4-way ClampKupo 4-way Clamp 4Way Clamp for 35mm to 50mm tube

Kupo 4.5 Center Grip HeadThe 4.5” Center Grip Head consists of a pair of rotating aluminum discs attached to a junior 28mm (1-1/8”) stud. The discs...

At the end of the Kupo 40" Extension Grip Arm you will find a baby hex pin with six milled flat surfaces. Allows mounting the light fixtures or acc...

Kupo 40" Hex Arm With Handle BlackKupo 40" Hex Arm With Handle BlackNow introducing an exciting innovation in grip arm design. At the end of our 40...

Kupo 40 Turtle Base Kit SilverThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still...

Kupo 40 Turtle Base KitThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still or mov...

The Kupo 40'' Extension Grip Arm with Baby Hex Pin (Silver) has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing, which is 5/8"...

The Kupo 5/8" Stud with 1/4"-20 Female is a small adapter that converts a 1/4"-20 male thread into a 5/8" Baby Stud. This is designed to mount a st...

Kupo 6x8 T-marker BlueTraditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on ...

Kupo 6x8 T-marker YellowTraditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape o...

Kupo Extension ArmKupo Extension Arm

Kupo 6x8 T-marker BlackTraditionally tape is used on the floor to indicate where the talent is supposed to stand. This works but does leave tape on...

The Wooden Apple Box is one of the most useful pieces of grip equipment you'll find on set. They are the ultimate multi-taskers, used for leveling ...

The Kupo Baby 5/8" Receiver is designed to attach quickly to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG9...

The Kupo Baby 5/8" Stud - 2.5" Long is designed to attach to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG9...

The Kupo Baby 5/8" Stud - 4.25" Long is designed to attach to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG...

The Kupo Baby Boom is an all metal chrome-plated steel finish boom that extends from 3.8'- 7.8' (1.1- 2.4M) and supports 11 lbs (5 Kg). It has a 5/...

The Kupo Baby Handheld Boom Arm 3.8'-10' (Black) is used to handhold a light while on location or on a tight set that requires motion. The sturdy 4...

The Kupo Baby Kit Stand with Square Legs 13' (Black) is a 13' support that can handle gear weighing up to 22 lb. The robustly built stand features ...

The Kupo Baby Pipe Clamp is identical to old C clamp designed for most hanging applications, but has a 5/8" (16mm) baby stud for mounting gear with...

The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightwei...

Kupo Convi Clamp W/studThe black Convi Clamp with Adjustable Handle and Hex Stud from Kupo has a load capacity of 44 lb and a ratcheted handle that...

Kupo Refillable Sandbag 22.4lbThe 22.4 lb, black Kupo Touch-Fastener Empty Refillable Sandbag is an indispensable safety measure on any set, preven...

Kupo Ez Grip FingerThe Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver has a 5/8" stud on one side and a 5/8" receiver on the other connected ...

The Kupo Folding Base Mini Stand combines the Kupo Backlite Base Stand (KS040211) with the Kupo Folding Mini Stand Pole to give you a variable heig...

Kupo Toad Male Mount6061-T6 CNC aluminum with a black hard anodized finish makes this Toad (male adapter) precisely mounted on ‘’Toad In The Hole Q...

This is especially designed for giving the most support to a grip arm. It is constructed with an extendable aluminum column, and comes with the bal...

The Kupo High Roller Stand 14' (Chrome) is designed to hold loads up to 88.20 lb at a maximum working height of 168.5" using a 3 riser, 4 section d...

The Kupo Holder can be used to mount a single Kino Flo fluorescent tube onto a compatible stand or grip head. It offers dual steel clips on its mai...