Under $100

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" ...

The versatile Kupo 3-Section Baby Stand Extension features a 3-section black aluminum pole that can extend from 3’ (89cm) to 7.7‘ (230cm) and secur...

The Claw by Matthews is designed to safely mount Astera Titan and Helios as well as T12 tube lights using the industry standard 5/8” baby pin. The ...

The KS-201 Junior Baby Adapter, constructed from durable steel and coated in chrome, allows for the secure attachment of lighting fixtures with 1 1...

The Nanlite PavoTube Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4''-20 Mount provides an adjustable and transpar...

The Kupo Baby Stand Extension is a 4 section black aluminum pole allowing a stand to extend to the maximum height to 4.2'. Features: Constructed o...

This clamp is custom-tailored to pair a Scrim Jim frame with a Grip Head for precise and secure mounting to a light stand or c-stand. This mounti...

The Air Cushioned Heavy-Duty Light Stand incorporates a durable design and tall telescoping tubing for classic light mounting in your studio or on ...

Use the LP653 Studio Clamp to attach strobes, swivels or other accessories to virtually any surface. The multi-purpose Studio Clamp will mount any ...

The LP532 32" Padded Lighting Case carries small light stands, a small tripod or a one compact strobist kit. This carry case is made of durable, pa...

The LP532 32" Padded Lighting Case carries small light stands, a small tripod or a one compact strobist kit. This carry case is made of durable, pa...

The LP634 Umbrella Swivel bracket features maximum versatility and the most sturdy build available. Primarily designed for use on a light stand, th...

The LP621 Mini Boom / Reflector Arm extends the reach of your lighting and is perfect for holding a reflector or a shoe mount flash and small acces...

The Kupo 2-1/2 Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V s...

The Kupo C-Stand Riser Column is a replacement column, identical to the ones that come with the Master C-Stands with Turtle Base. It features a jun...

At the end of the Kupo 40" Extension Grip Arm you will find a baby hex pin with six milled flat surfaces. Allows mounting the light fixtures or acc...

The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightwei...

The Manfrotto 172 Counterweight is a 3 lbs (1.4kg) counterweight that clamps on bars 13 to 30mm thick.Features: 1,4Kg (3lb) painted iron counter b...

The Kupo Safety Wire is lightweight steel safety cable. It is 29.5" (75cm) long and has a diameter of 0.13" (3.5mm) with a load rating of 22lbs (10...

When you’re on location without access to AC power, the Westcott L60-B Battery Grip with NP-F Adapter provides an ergonomic solution for portable p...

The Baby Drop Down Pin features a baby receiver and a baby pin. It is most often used on boom arms. The pivoting pin allows a light with a reflecto...

Spare stand adapter for the Pro-B Head, ProHead, ProTwin Head, Acute/D4Head, Acute/D4 Twin and former AcuteB Head.

 Westcott Light Stand Clip is designed to work with Pop-up Backgrounds & Reflectors.Weighing a mere 0.1 lbs (50 g) and small enough to fit in a...

The Manfrotto 023 Counterweight - 10lb is a painted iron counter balance weight for use with any heavy duty boom or light stand.Features: 4,3Kg (1...

The Matthews 5039 Offset U-Hook is the perfect partner for the Manfrotto Super Clamp, benefiting from a max payload capacity of 15Kg (33.01lbs) and...

The  ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2" thick. It supports two accessories whil...

The Kupo 20'' Extension Grip Arm with Baby Hex Pin (Black) has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip h...

The Matthews Baby Pin 5/8" with 3/8" Threaded Tip screws into a female 3/8" hole and provides an industry standard 5/8" (16mm) baby pin for rigging...

The Matthews Matthellini Clamp with 2" Center Jaw (Silver) provides strong, solid gripping of round, square, or rectangular tubing and many other c...

The Kupo 2-1/2" Grip Head With Big Handle (Chrome Plated Finish) has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roll...

The Delta 1 3/8" Female to 5/8" Male Adapter enlarges a 3/8 in light stand top stud to 5/8 in standard diameter stud. The adapter is 1-1/2 in long ...

The Avenger Extension Grip Arm 20" - Chrome is one of the most popular accessories used on C-Stands and is commonly used with the D200 grip head! G...

The Kupo Super Knuckle VESA Monitor Mount Kit is designed for lightweight monitors. You can easily rotate a monitor from landscape to portrait view...

Godox Silicone Fender for AD200Pro Flash Kit

The Matthews MERF Mini Extendable Reverse Stand is a small, robust kit stand with reverse folding legs. This stand can support up to 9 lbs (4 kg), ...

The Matthews Dutti Dolly Universal Stand Bracket is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on sta...

Uneven surfaces, hills, and stairs present challenges when using traditional light stands. The Westcott M6 Multi-Mount Tripod Plate allows you to c...

Kupo Ez Grip FingerThe Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver has a 5/8" stud on one side and a 5/8" receiver on the other connected ...

F301 Baby Wall PlateF301 Baby Wall Plate

The Westcott Spiderlite Compact Carry Case is a soft-padded carry case designed to transport and protect up to a two-light kit. It can hold lights,...

The Kupo Super Viser Clamp 9" with End Jaw is an extremely strong and versatile clamp. It can mount securely onto round and square objects or just ...

The Kupo 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread can be used with a grip head or Kupo Convi Clamp attached to any accessory with fe...

The Kupo 40'' Extension Grip Arm with Baby Hex Pin (Silver) has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing, which is 5/8"...

Kupo 4-way ClampKupo 4-way Clamp 4Way Clamp for 35mm to 50mm tube

The Kupo Baby 5/8" Stud - 4.25" Long is designed to attach to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG...

Special adapter.Special adapter.

This handy clamp enables you to quickly mount and position your off-camera flash in seconds to both round and flat surfaces. It consists of an Alli...

Nanlite Forza 60 Bowens AdptrThe Nanlite Forza 60 Bowens Mount Adapter expands the light shaper compatibility of the Forza 60 to include most Bowen...