Light Stands & Grip

The Aputure Dual Head Yoke for the Nova P600c allows users to stack two Nova P600c lamp heads and mount them to a single durable aluminum frame, m...

The LS 1200 Four Light Bracket for the Light Storm LS 1200d Pro allows users to mount up to four LS 1200d Pros1 or other fixtures with Junior Mount...

Aputure LS60 Softbox The LS 60 Softbox is a square softbox that matches the compact design of the 60d and 60x by softening the output without addin...

The Aputure Nova P600c Pole Operated Yoke is designed specifically for studio use, allowing users to adjust the pan and tilt of the Nova P600c ...

Manual Yoke W/spigot F/orbiterThe Manual Yoke with Spigot for Orbiter from ARRI replaces the light's pole-operated yoke or provides one for Orbiter...

Chimera Space Light Silk MntThe Space Light Silk Mounting Adapter slides on to the spigot of the SkyPanel S60 and allows for the attachment of a st...

The Avenger AVCSA1301B Roller Case for Detachable C-Stands and Accessories is an ultra-tough, hardwearing case is designed and built for the profes...

The Avenger D420 4.5" Jumbo Gobo Head is a double grip head that adds versatility to any light stand.

D500BNormally used in combination with a Grip head (art. D200) it provides an extended grip point for scrims and flags.

-Normally used in combination with a Grip head (art. D200) it provides an extended grip point for scrims and flags or small lights.

-Normally used in combination with a Grip head (art. D200) it provides an extended grip point for scrims and flags or small lights.

The Avenger Extension Grip Arm 20" - Chrome is one of the most popular accessories used on C-Stands and is commonly used with the D200 grip head! G...

Bron Para Adapter PThis Para Adapter from Broncolor allows lights with the Broncolor bayonet mount to attach to Focusing Rod F on all Paras. This i...

The Delta 1 3/8" Female to 5/8" Male Adapter enlarges a 3/8 in light stand top stud to 5/8 in standard diameter stud. The adapter is 1-1/2 in long ...

The Bowens Mount Adapter for AD400Pro Flash allows use of Godox Bowens Mount modifiers, as well as others from the many manufacturers that use this...

The Godox Dual Power Flash Bracket for AD200 allows you to merge the power of two AD200 Pocket Flashes together to double the flash power.  Compact...

Adjustable to fit most speedlites, the Godox S2 Speedlite Bracket for Bowens is more compact and portable than the original S-type bracket and lets...

Godox Silicone Fender for AD200Pro Flash Kit

The Kupo 2-1/2 Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V s...

The Kupo 2-1/2" Grip Head With Big Handle (Chrome Plated Finish) has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roll...

The Kupo 20'' Extension Grip Arm with Baby Hex Pin (Black) has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip h...

Kupo 24" Baby Stand Extension adds that little bit extra height to your light stands, baby plates or any other baby pin that needs extending. These...

The versatile Kupo 3-Section Baby Stand Extension features a 3-section black aluminum pole that can extend from 3’ (89cm) to 7.7‘ (230cm) and secur...

Kupo 4-1/2 Grip Head W/ 1/8The 4-1/2" Grip Head KG400512 consists of a pair of rotating aluminum discs attached to a junior 1/8 (28mm) stud and rec...

Kupo 4.5 Center Grip HeadThe 4.5” Center Grip Head consists of a pair of rotating aluminum discs attached to a junior 28mm (1-1/8”) stud. The discs...

At the end of the Kupo 40" Extension Grip Arm you will find a baby hex pin with six milled flat surfaces. Allows mounting the light fixtures or acc...

The Kupo 40'' Extension Grip Arm with Baby Hex Pin (Silver) has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing, which is 5/8"...

The Kupo 5/8" Stud with 1/4"-20 Female is a small adapter that converts a 1/4"-20 male thread into a 5/8" Baby Stud. This is designed to mount a st...

Kupo Extension ArmKupo Extension Arm

The Kupo Baby Boom is an all metal chrome-plated steel finish boom that extends from 3.8'- 7.8' (1.1- 2.4M) and supports 11 lbs (5 Kg). It has a 5/...

The Baby Drop Down Pin features a baby receiver and a baby pin. It is most often used on boom arms. The pivoting pin allows a light with a reflecto...

The Kupo Baby Stand Extension is a 4 section black aluminum pole allowing a stand to extend to the maximum height to 4.2'. Features: Constructed o...

The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightwei...

Kupo Ez Grip FingerThe Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver has a 5/8" stud on one side and a 5/8" receiver on the other connected ...

The Kupo Holder can be used to mount a single Kino Flo fluorescent tube onto a compatible stand or grip head. It offers dual steel clips on its mai...

The Kupo Junior 1-1/8" Stud to Baby 5/8" Stud Adapter enables you to mount a light fixture or accessory with a baby 5/8" (16mm) receiver to any sta...

The KS-201 Junior Baby Adapter, constructed from durable steel and coated in chrome, allows for the secure attachment of lighting fixtures with 1 1...

Constructed from heavy-duty iron casting, the Kupo Swivel Junior Receiver Adapter comes with a male 1-1/8" pin (28mm) at one side designed to drop ...

Kupo Mini Flex Arm W/ ClipKupo's Mini Flex Arm With Alligator Clip is a mini flex arm with a 3/8"-16 female thread inside a baby 5/8" (16 mm) adapt...

Painter's poles are inexpensive and expand quickly to your desired length. As such they are the perfect option for a hand held boom. The Kupo Paint...

  Kupo Runway Stand Base is compact but incredibly strong wheeled base allows its legs to be folded parallel to one another for easy storage and tr...

Made of heavy-duty metal, this Super Grip features a ball head with a 1/4''-20 thread male stud on a round camera plate and a TVMP adapter. This al...

The Kupo Super Knuckle VESA Monitor Mount Kit is designed for lightweight monitors. You can easily rotate a monitor from landscape to portrait view...

The LP532 32" Padded Lighting Case carries small light stands, a small tripod or a one compact strobist kit. This carry case is made of durable, pa...

The LP532 32" Padded Lighting Case carries small light stands, a small tripod or a one compact strobist kit. This carry case is made of durable, pa...