Light Stands & Grip

Kupo Qr Monitor BracketEliminate the extra time and hassle of mounting a field monitor to your camera with the Kupo 1/4"-20 Quick Release Monitor B...

17.5" Super viser clamp has a 5/8" spigot to mount lighting fixtures or grip accessories. Hexagonal receiver on the base to mount accessories that ...

The Kupo 2-1/2 Grip Head consists of a pair of rotating aluminum discs attached to a 5/8" (16 mm) receiver. The discs have four different sized V s...

The Kupo 2-1/2" Grip Head With Big Handle (Chrome Plated Finish) has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roll...

The Kupo Safety Wire is lightweight steel safety cable. It is 29.5" (75cm) long and has a diameter of 0.13" (3.5mm) with a load rating of 22lbs (10...

Kupo 20 Turtle Base KitThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still or mov...

Kupo 20 Turtle Base Kit SilverThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still...

The Kupo 20'' Extension Grip Arm with Baby Hex Pin (Black) has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip h...

Kupo 24" Baby Stand Extension adds that little bit extra height to your light stands, baby plates or any other baby pin that needs extending. These...

Kupo 3-way Clamp3 Way Clamp for 25mm to 35mm tube

The Kupo 3.5" Extra Long 5/8" Baby Stud with 3/8"-16 Male Thread can be used with a grip head or Kupo Convi Clamp attached to any accessory with fe...

The Kupo 3.5" Long 5/8" Baby Stud with 1/4"-20 Male Thread is a small accessory for a lighting grip kit. It offers a 1/4"-20 screw as its mounting ...

Kupo 4-1/2 Grip Head W/ 1/8The 4-1/2" Grip Head KG400512 consists of a pair of rotating aluminum discs attached to a junior 1/8 (28mm) stud and rec...

The 9.7' Kupo Aluminum Studio Roller Stand is designed to hold loads up to 33lbs with a folding base. The stand features aluminum sections, a black...

Kupo 4-way ClampKupo 4-way Clamp 4Way Clamp for 35mm to 50mm tube

Kupo 4.5 Center Grip HeadThe 4.5” Center Grip Head consists of a pair of rotating aluminum discs attached to a junior 28mm (1-1/8”) stud. The discs...

At the end of the Kupo 40" Extension Grip Arm you will find a baby hex pin with six milled flat surfaces. Allows mounting the light fixtures or acc...

Kupo 40" Hex Arm With Handle BlackKupo 40" Hex Arm With Handle BlackNow introducing an exciting innovation in grip arm design. At the end of our 40...

Kupo 40 Turtle Base Kit SilverThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still...

Kupo 40 Turtle Base KitThe Kupo Master C Stand with Turtle Base features a unique innovation in the world of C Stands that enables the still or mov...

The Kupo 40'' Extension Grip Arm with Baby Hex Pin (Silver) has a 2-1/2" grip head mounted on the end of a 40" piece of steel tubing, which is 5/8"...

The Kupo 5/8" Stud with 1/4"-20 Female is a small adapter that converts a 1/4"-20 male thread into a 5/8" Baby Stud. This is designed to mount a st...

Kupo Extension ArmKupo Extension Arm

The Kupo Baby 5/8" Receiver is designed to attach quickly to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG9...

The Kupo Baby 5/8" Stud - 2.5" Long is designed to attach to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG9...

The Kupo Baby 5/8" Stud - 4.25" Long is designed to attach to any of the mounting locations on either the 3 Way Clamp (KG900412) or 4 Way Clamp (KG...

The Kupo Baby Boom is an all metal chrome-plated steel finish boom that extends from 3.8'- 7.8' (1.1- 2.4M) and supports 11 lbs (5 Kg). It has a 5/...

The Kupo Baby Handheld Boom Arm 3.8'-10' (Black) is used to handhold a light while on location or on a tight set that requires motion. The sturdy 4...

The Kupo Baby Kit Stand with Square Legs 13' (Black) is a 13' support that can handle gear weighing up to 22 lb. The robustly built stand features ...

The Kupo Baby Pipe Clamp is identical to old C clamp designed for most hanging applications, but has a 5/8" (16mm) baby stud for mounting gear with...

The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightwei...

Kupo Convi Clamp W/studThe black Convi Clamp with Adjustable Handle and Hex Stud from Kupo has a load capacity of 44 lb and a ratcheted handle that...

Kupo Ez Grip FingerThe Kupo EZ Grip Finger with Baby 5/8" Stud and Receiver has a 5/8" stud on one side and a 5/8" receiver on the other connected ...

The Kupo Folding Base Mini Stand combines the Kupo Backlite Base Stand (KS040211) with the Kupo Folding Mini Stand Pole to give you a variable heig...

This is especially designed for giving the most support to a grip arm. It is constructed with an extendable aluminum column, and comes with the bal...

The Kupo High Roller Stand 14' (Chrome) is designed to hold loads up to 88.20 lb at a maximum working height of 168.5" using a 3 riser, 4 section d...

The Kupo Holder can be used to mount a single Kino Flo fluorescent tube onto a compatible stand or grip head. It offers dual steel clips on its mai...

The Kupo Junior 1-1/8" Stud to Baby 5/8" Stud Adapter enables you to mount a light fixture or accessory with a baby 5/8" (16mm) receiver to any sta...

Designed for background lights. It is perfect for those low angle shots or for a backlight. It's also ideal for holding fill light reflectors for p...

Kupo Master Combo Hd StandThe Kupo S200112 Master Combo HD Stand is chrome plated steel combo stand with a load capacity of 88.2 lbs (40 Kg). Combo...

The Kupo Medium Overhead Roller Stand 14' (Chrome) has a maximum load capacity of 88.2 lb and maximum working height of 169.3", using a three-riser...

Kupo 8' Midi Click Light StandFeatures an interlocking mechanism that allows the stand to fold flat and click it to another stand in just a snap. T...

Kupo Mini Flex Arm W/ ClipKupo's Mini Flex Arm With Alligator Clip is a mini flex arm with a 3/8"-16 female thread inside a baby 5/8" (16 mm) adapt...

The Kupo Multi-Clip is a stacked pair of connected clips constructed from solid steel material, with a black powder finish. It is 4.25in (10.8cm) i...

This handy clamp enables you to quickly mount and position your off-camera flash in seconds to both round and flat surfaces. It consists of an Alli...

Painter's poles are inexpensive and expand quickly to your desired length. As such they are the perfect option for a hand held boom. The Kupo Paint...

  Kupo Runway Stand Base is compact but incredibly strong wheeled base allows its legs to be folded parallel to one another for easy storage and tr...

The Kupo Slider Stand 45.3" (Black) is the ultimate stand for supporting sliders rigged with any size camera. The Kupo Slider Stand weighs 12.8 lbs...