Advanced Mini Wireless Microphone
DJI Mic 3 is compact and portable, delivering clear, detailed audio. With 4TX+8RX, adaptive gain control, and voice tone presets, it excels in any scenario.
Lightweight & Intuitive, Compact Storage [1]
The DJI Mic 3 Transmitter is compact, lightweight, and discreet. It supports both magnetic and clip-on attachment methods. The all-in-one charging case conveniently stores the transmitters, receiver, and accessories[1] for easy access and portability.
4TX + 8RX Capability & Four-Channel Output [2]
DJI Mic 3 supports simultaneous use of up to four transmitters and eight receivers. When paired with select cameras or software, the DJI Mic 3 Receiver supports independent output of four audio tracks. Whether it's a group interview or a multi-camera production, you'll get crystal-clear audio on every device, making post-production a breeze.
Adaptive Gain Control for Balanced Volume [3]
Automatic mode effectively prevents audio clipping, making it ideal for outdoor environments with dramatic volume fluctuations, such as sporting events. Dynamic mode automatically adjusts gain in response to volume changes, ensuring consistent loudness—ideal for quiet indoor settings like studios.
Three Voice Tone Presets [4], Two-Level Noise Cancelling [5]
There are three tone presets to choose from: Regular offers natural and balanced audio, Rich puts extra emphasis on the lows for a fuller, more powerful sound, and Bright highlights the highs, giving your voice extra clarity. There are also two noise reduction levels: The Basic level is ideal for quiet indoor settings, reducing noise while preserving vocal clarity. The Strong level excels in noisy environments, significantly cutting ambient noise for clearer vocals.
Dual Band Anti-Interference [6], Lossless Audio Transmission
DJI Mic 3 supports automatic frequency hopping between 2.4 GHz and 5 GHz bands [6], with a transmission range of up to 400 meters [7]. With Lossless Audio enabled [8], it supports 48kHz 24-bit high-fidelity audio transmission, ensuring pure and clear sound quality even in complex environments.
Dual-File 32-bit Float Internal Recording
DJI Mic 3 saves both the original track and an algorithm-enhanced version at once [9], preventing material loss and streamlining post-production. With its high dynamic range, it excels at capturing every nuance of a voice, from quiet whispers to booming decibel levels, providing more flexibility in post-production.
Integrated Timecode for Seamless Editing
DJI Mic 3 offers high-precision timecode support [10], with the transmitter embedding timecode data during internal recording and the receiver supporting both timecode input and output. With less than one frame of drift over 24 hours [11], you can instantly align multi-camera footage in post-production for faster, more efficient editing.
Extended Operating Time & Fast Charging
A transmitter lasts up to 8 hours [12], and a receiver up to 10 hours [12]. A fully charged charging case provides about 2.4 full charges to achieve a total of 28 hours of extended use [13]. Charge for just 5 minutes and get up to 2 hours of use [14] from the transmitter and receiver—ideal for a quick power boost. It also supports multiple power-saving features, including using while charging[15].
Features:
- Lightweight & Intuitive, Compact Storage
- 4TX + 8RX Capability & Four-Channel Output
- Adaptive Gain Control for Balanced Volume
- Three Voice Tone Presets, Two-Level Noise Cancelling
- Dual Band Anti-Interference, Lossless Audio Transmission
- Dual-File 32-bit Float Internal Recording
- Integrated Timecode for Seamless Editing
- Extended Operating Time & Fast Charging
Compatible With:
Mics:
Accessories (Sold Separately):
- DJI Mic Series Camera Adapter (Glazer's SKU #26579)
FAQ:
How do I update the firmware of the DJI Mic 3 transmitters and receiver?
- Connect the DJI Mic 3 Receiver to a phone either via a phone adapter (USB-C or Lightning) or directly to the DJI Mimo app, and update the firmware for the receiver in the DJI Mimo app. After placing the receiver in the charging case, you can also update the firmware for the transmitters and the charging case.
- A DJI Mic 3 Transmitter can also connect directly to the DJI Mimo app to complete its firmware update.
The DJI Mic 3 Mobile Phone Adapter (Lightning) is sold separately.
How do I link the DJI Mic 3's transmitters with the receiver?
The transmitters and receiver in the same combo are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the transmitters and receiver into the charging case and they will link automatically.
Method 2: Power on the transmitters and receiver, swipe down on the receiver's main screen to enter the Settings, then swipe left to choose Device Linking. Add TX by selecting the desired TX slot. Press and hold the Linking Button on one transmitter, and follow the on-screen instructions to complete linking. When the System Status LED on the transmitter blinks green and blue alternately, it indicates that linking is in progress. When the LED turns solid green, the linking is complete.
To end linking during the process, tap Cancel.
How long does it take to fully charge the transmitters and receiver using the DJI Mic 3 Charging Case? How long does it take to fully charge the charging case separately?
It is recommended to use a 5V/2A charger to charge DJI Mic 3 transmitters, the receiver, and the charging case.
The DJI Mic 3 transmitters and receiver both support fast charging. When using the DJI Mic 3 Charging Case, both the transmitters and receiver can be charged to 80% in just 18 minutes*. The transmitters can also be charged via the DJI Mic 3 Transmitter Magnetic Charging Cable, reaching 80% in 18 minutes* as well.
At room temperature, it takes approximately 50 minutes* to fully charge the transmitters and the receiver using the charging case. It takes about 1.5 hours* to fully charge the charging case separately.
* Measured in a controlled test environment and is for reference only.
Product SKU:
CP.RN.00000477.03
In The Box:
DJI Mic 3 Receiver (1RX)
DJI Mic 3 Mobile Phone Adapter (USB-C)
USB-C to USB-C Data Cable
DJI Mic 3 Locking Audio Adapter Cable (3.5mm TRS to TRS)
DJI Mic 3 Compact Carrying Pouch
Note: This is not compatible with DJI Mic, DJI Mic 2, or DJI Mic Mini.
-----
Footnotes:
* All of the above data was collected in a controlled environment. Actual experience may vary. For usage settings and suggestions, refer to the official DJI product page.
1. When storing accessories in the charging case, avoid stacking to prevent receiver screen damage.
2. To achieve the 4TX + 8RX setup or four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic 3 website.
3. The Adaptive Gain Control feature can be configured via the receiver or the DJI Mimo app, and it is turned off by default.
4. The Voice Tone Preset modes can be selected via the receiver or the DJI Mimo app, with the default set to Regular.
5. The Noise Cancelling feature is turned off by default but can be activated and set to either Strong or Basic level through the receiver, DJI Mimo app, or device directly connected via the OsmoAudio™ ecosystem. When using the receiver with multiple transmitters, you can adjust the noise cancelling settings for each transmitter individually or for all transmitters simultaneously. When an Osmo 360, Osmo Action 5 Pro, Osmo Action 4, or Osmo Pocket 3 is connected directly via OsmoAudio™, settings can be adjusted on the product interface. When the transmitter is directly connected to a smartphone, the settings can be adjusted within the Mimo app.
6. Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
7. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with Lossless Audio off, in an open, unobstructed environment free of interference.
8. When Lossless Audio is enabled, the transmitter's battery life will decrease by approximately 2 hours under nominal operating conditions, and the maximum transmission range will be reduced by approximately 50%.
9. Algorithm-based enhancements include voice tone presets, low cut, noise cancellation, and adaptive gain control.
10. For details on supported timecode modes, frame rates, and timecode output formats, refer to the FAQ page on the official DJI Mic 3 website.
11. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) in an environment free of electromagnetic interference, with continuous power supplied to the transmitters and receiver following timecode synchronization and throughout 24 hours of continuous recording.
12. For a list of compatible devices, refer to the Downloads page on the official DJI Mic 3 website.
13. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) paired with a fully charged charging case, with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.
14. Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case), with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.
15. Measured in a controlled environment with the transmitters and receiver battery levels below 25%, using a charger of 5V output, with noise cancellation off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver, and the receiver connected to a camera via the 3.5mm audio cable.
16. Data was collected in a controlled environment and should be taken as reference only.
17. This feature is only effective when the device is powered on. If the auto power-off feature for the transmitter and receiver is enabled in the DJI Mimo app or on the receiver screen, both devices will automatically shut down if no pairing signal is detected after 15 minutes.
18. If your phone uses a Lightning interface, the receiver cannot be powered by the phone's battery without an external power source. To enable simultaneous charging and use, you need to purchase the DJI Mic 3 Mobile Phone Adapter (Lightning) separately.
19. Some features of DJI Mic 3 cannot be configured through the device directly connected via the OsmoAudio™ ecosystem. For details, refer to the FAQ page on the official DJI Mic 3 website.
20. Only one transmitter can be directly connected and used as the audio input source at a time.
21. When connected directly to a smartphone via Bluetooth, the transmitter does not support audio recording with the phone's native camera app; it only works with third-party apps. For a list of compatible apps, refer to the Downloads page on the DJI Mic 3 official website.
22. Sold separately.
