Elinchrom Flashtube 250/500w/s for BXRi & Quadra A Flash Heads

Elinchrom Flashtube 250/500w/s for BXRi & Quadra A Flash Heads

This Elinchrom Flashtube (250/500 W/S) is designed for the BXRi and Quadra A Flash Heads, allowing for a unique super short flash duration of up to 1/6000 sec. It is a user-replaceable and UV twin-electrode flashtube, perfect for professional photographers seeking high-quality lighting options.

Features:

• User replaceable
• UV coated
• Plug-in A Flashtube
• Compatible with Ranger Quadra A-Head and BXRi 250/500

Compatible With:

Monolights:

• Elinchrom BRX 250
• Elinchrom BRX 500
• Elinchrom BXRi 250
• Elinchrom BXRi 500

Other:

• Elinchrom Ranger Quadra A Head
• Elinchrom Ranger Quadra Hybrid A

Flashtube Replacement:

Most Elinchrom flash heads have plug-in flashtubes, making it easy to change flashtube yourself.

1. Switch the unit OFF
2. Remove the mains cable
3. Take the unit from its stand and lay it horizontally on a rigid surface.
4. It will need to be held firmly whilst removing and replacing the flashtube.
5. Allow the flashtube and modeling lamp to cool down and wait for the unit to discharge for 30 minutes.
6. Carefully remove and store the modeling lamp. They can be very hot.
7. Pull the flashtube firmly out of the terminals.
8. If the tube is broken, use security gloves to avoid cutting yourself and use an insulated tool to pull out the electrodes.
9. Never touch the metal electrodes and ensure that the unit has been disconnected from the mains for 30 minutes.
10. Take the new flashtube.
11. Insulated tissues or security gloves MUST BE USED.
12. Any contact with your fingers on the tube can cause dark markings on the tube when used.
13. Check that the tube is correctly aligned (central) and that the trigger contact is gripping the tube.
14. Re-connect and test the unit as usual.
15. Always use a protective glove to remove the flashtube.

Product SKU:

EL24000

In The Box:

Elinchrom Flashtube 250/500w/s for BXRi & Quadra A Flash Heads