All

When you’re on location without access to AC power, the Westcott L60-B Battery Grip with NP-F Adapter provides an ergonomic solution for portable p...

Spare stand adapter for the Pro-B Head, ProHead, ProTwin Head, Acute/D4Head, Acute/D4 Twin and former AcuteB Head.

The Aputure Dual Head Yoke for the Nova P600c allows users to stack two Nova P600c lamp heads and mount them to a single durable aluminum frame, m...

The Aputure Nova P600c Pole Operated Yoke is designed specifically for studio use, allowing users to adjust the pan and tilt of the Nova P600c ...

 Westcott Light Stand Clip is designed to work with Pop-up Backgrounds & Reflectors.Weighing a mere 0.1 lbs (50 g) and small enough to fit in a...

The Manfrotto 023 Counterweight - 10lb is a painted iron counter balance weight for use with any heavy duty boom or light stand.Features: 4,3Kg (1...

The Matthews 5039 Offset U-Hook is the perfect partner for the Manfrotto Super Clamp, benefiting from a max payload capacity of 15Kg (33.01lbs) and...

The  ProMaster Desktop Broadcast Stand clamps to the edge of a desk, table, or countertop surface up to 2" thick. It supports two accessories whil...

Designed for the ultimate portability, this Westcott Compact Light Stand - 7' light stand is lightweight yet remarkably sturdy. Featuring folding l...

The Kupo 20'' Extension Grip Arm with Baby Hex Pin (Black) has a 5/8" hex pin at one end of a 20" textured, non-slip steel tube and a 2-1/2" grip h...

The Matthews Light/Heavy Triple Riser Kit Stand 12.4' is compact and lightweight, ideal for assembling custom lighting kits or replacing your curre...

*Available for in store pick up only. This item does not ship.The Matthews Medium Duty Kit Stand with Brake - 7.7' (Black) is designed primarily fo...

*Available for in store pick up only. This item does not ship.The Matthews 20" C+Stand with Spring Loaded Turtle Base, Grip Head and Arm Kit - Blac...

The Matthews Baby Pin 5/8" with 3/8" Threaded Tip screws into a female 3/8" hole and provides an industry standard 5/8" (16mm) baby pin for rigging...

*Available for in store pick up only. This item does not ship.The Matthews Medium Overhead Roller Stand 14' (Black) is designed to support flying b...

 The Nanlite Foldable Floor Stand For PavoTube II 15X and 30X LED Pixel Tubes is a fast and portable support designed to enable PavoTube II 15X and...

US-9411073B The PSA1+ is the ultimate studio boom arm for podcasters, streamers and broadcasters. Its innovative parallelogram spring design ensu...

The Avenger AVCSA1301B Roller Case for Detachable C-Stands and Accessories is an ultra-tough, hardwearing case is designed and built for the profes...

*Available for in store pick up only. This item does not ship.The Matthews Mini Boom 45-80" (Chrome) is made out of steel and is designed to resist...

The Matthews Matthellini Clamp with 2" Center Jaw (Silver) provides strong, solid gripping of round, square, or rectangular tubing and many other c...

The Kupo 2-1/2" Grip Head With Big Handle (Chrome Plated Finish) has four V-shaped jaws, an ergonomic oversized T-shaped handle with dedicated roll...

The Avenger Extension Grip Arm 20" - Chrome is one of the most popular accessories used on C-Stands and is commonly used with the D200 grip head! G...

*Available for in store pick up only. This item does not ship.The Matthews Junior Steel Triple Riser Rolling Stand - 12.8' is designed for larger l...

The Claw by Matthews is designed to safely mount Astera Titan and Helios as well as T12 tube lights using the industry standard 5/8” baby pin. The ...

The Kupo Super Knuckle VESA Monitor Mount Kit is designed for lightweight monitors. You can easily rotate a monitor from landscape to portrait view...

Godox Silicone Fender for AD200Pro Flash Kit

The Matthews MERF Mini Extendable Reverse Stand is a small, robust kit stand with reverse folding legs. This stand can support up to 9 lbs (4 kg), ...

The Matthews Dutti Dolly Universal Stand Bracket is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on sta...

The Matthews Hollywood Combo Triple Riser Stand - 14.8' (Silver) has a wide 43" footprint and extra-long legs to provide stability. It rises to a m...

*Available for in store pick up only. This item does not ship.The Matthews 40" C-Stand with Spring Loaded Turtle Base, Grip Head and Arm Kit (Silve...

The Westcott Shorty Offset Extension Arm is great for butterfly, hair, rim, and other lighting situations, this 8” mini extension arm is an ideal l...

Uneven surfaces, hills, and stairs present challenges when using traditional light stands. The Westcott M6 Multi-Mount Tripod Plate allows you to c...

The Kupo Baby Handheld Boom Arm 3.8'-10' (Black) is used to handhold a light while on location or on a tight set that requires motion. The sturdy 4...

Matthews Telescoping Hangers are designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to tele...

Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or ...

Matthews Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the ...

The Matthews Century C+ Stand with Removable Turtle Base features a 40" main riser with a removable turtle base. The unique staggered leg design of...

This Matthews Baby Jr. Triple Riser Stand is designed to support baby fixtures which require a 5/8" mounting pin. The tripod braced base with 'all-...

The head on this black finish Matthews Hollywood Head and Arm features two holes -- 3/8 and 5/8 inch. T-Handles are ergonomically designed to allow...

Aputure LS60 Softbox The LS 60 Softbox is a square softbox that matches the compact design of the 60d and 60x by softening the output without addin...

  Matthews Mini Sliders are made to support lights weighing up to 80 lb, and are ideal for low angle shooting. The steel stand rises to a maximum h...

The Kupo Holder can be used to mount a single Kino Flo fluorescent tube onto a compatible stand or grip head. It offers dual steel clips on its mai...

Matthews Hi-Hi Overhead Roller Stands are developed for flying Butterflies and Overheads on location and supporting large backdrops in studios, th...

The Avenger B6039CS 12' Wind-Up Stand with Braked Wheels - Chrome is a wind up stand capable of easily lifting and lowering loads of 30kg/66.1lbs w...

  Kupo Runway Stand Base is compact but incredibly strong wheeled base allows its legs to be folded parallel to one another for easy storage and tr...

The Kupo Slider Stand 45.3" (Black) is the ultimate stand for supporting sliders rigged with any size camera. The Kupo Slider Stand weighs 12.8 lbs...

The Kupo Folding Base Mini Stand combines the Kupo Backlite Base Stand (KS040211) with the Kupo Folding Mini Stand Pole to give you a variable heig...

This handy clamp enables you to quickly mount and position your off-camera flash in seconds to both round and flat surfaces. It consists of an Alli...