Light Stands & Grip

*Available for in store pick up only. This item does not ship.The Matthews 20" C+Stand with Spring Loaded Turtle Base, Grip Head and Arm Kit - Blac...

This is a Matthews Hollywood Century C Stand Kit. It consists of a Double Riser Sliding Leg C Stand with a Grip Head and 40" Arm.The unique stagger...

*Available for in store pick up only. This item does not ship.The Matthews 40" C-Stand with Spring Loaded Turtle Base, Grip Head and Arm Kit (Silve...

Matthews Century C+ Stand with Turtle Base and Grip Arm Kit consists of a 40" three-section upright with two risers. It includes a removable turtle...

This Matthews Century C+ Grip Head Kit consists of a Black Century C Plus Stand with 40" main riser with removable turtle base, a 2.5" swivel grip...

Used to attach the Infinity Arm to any 5/8" baby pin.  Great for using the arm with clamps like the Matthellini Clamp, on stands to hold strobes an...

The Matthews 5/8" Male Accessory Tip for the Infinity Arm mounts to either end of the Infinity Arm, increasing its versatility and mounting options.

Matthews Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the ...

The Matthews 5039 Offset U-Hook is the perfect partner for the Manfrotto Super Clamp, benefiting from a max payload capacity of 15Kg (33.01lbs) and...

The AFFLAC Clamp was designed by Matthews to hold small reflector cards, gels, and foam core mostly for tabletop shooting. Matthews welded the same...

The Matthews Baby Pin 5/8" with 3/8" Threaded Tip screws into a female 3/8" hole and provides an industry standard 5/8" (16mm) baby pin for rigging...

Matthews Baby Pipe Clamps has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture attached,...

When a Baby Lighting fixture needs to be just a little higher, the stand extension can be added to the top of the stand, nail on plate or other har...

Matthews Baby Triple Headers are especially useful when several light fixtures are needed in a relatively small amount of floor space. These header...

The Matthews Back Light Stand is configured so that accurate positioning of the back light may be achieved. Used for either background illumination...

ransport up to three select C-stands, removable base C-stands with arms and related accessories. The main compartment features a bright red, high-v...

Carrying one or two select fixed base C-stands with arms is a simple chore with the black C-Stand Shoulder KitBag from Matthews. The main compartme...

The Matthews Century C+ Stand with Removable Turtle Base features a 40" main riser with a removable turtle base. The unique staggered leg design of...

The Cheater Adapter has a 5/8' receiver with the Baby Pin set at an angle, to eliminate barn door interference.

Similar to the 3" Baby Plate with one big difference - the pin is mounted at an angle, which eliminates barn door interference when positioning a ...

Matthews Sandbags come in a variety of shapes and weights. They are used for securing the bases of light stands and set walls. Many have handles, f...

The Matthews Dutti Dolly Universal Stand Bracket is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on sta...

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle desig...

Matthews Foam Core Holder is made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate....

Hi-hi Overhead Roller Stand

This ultra-tall stand features square foot castings to allow upright storage of the stand when collapsed. Developed for flying Butterflys and Overh...

Matthews Hi-Hi Overhead Roller Stands are developed for flying Butterflies and Overheads on location and supporting large backdrops in studios, th...

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" ...

The 5.25' Hollywood 20" C-Stand with Sliding Leg, Grip Head & Arm from Matthews is ideal for placing flags, color gels, bounce cards, and silks...

The Matthews Hollywood C-Stand Grip Arm Kit stand rises to a maximum height of 10.5' and has a stable footprint of 27.5". The sliding leg can be po...

This Matthews Baby Jr. Triple Riser Stand is designed to support baby fixtures which require a 5/8" mounting pin. The tripod braced base with 'all-...

The Matthews Hollywood Beefy Baby Triple Riser Stand is constructed of steel with a silver-finished, has a triple riser that extends to 12.3'. It h...

  This is a Matthews Hollywood Century "C" Stand with 20" main section, 2 risers and sliding leg base. It includes a 20" arm and grip head. When th...

The Matthews Hollywood Combo Triple Riser Stand - 14.8' (Silver) has a wide 43" footprint and extra-long legs to provide stability. It rises to a m...

This 40" Hollywood Black Gobo Arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. Plates f...

The strongest and most popular 2-1/2" grip head in the industry. Black anodized casting offers positive lock in all directions. The grip plates now...

The head on this black finish Matthews Hollywood Head and Arm features two holes -- 3/8 and 5/8 inch. T-Handles are ergonomically designed to allow...

The Matthews Hollywood Low Boy Double Riser Combo Stand is constructed of steel in a black powder coat finish, rises to a maximum height of 6.4' an...

Infinity Arm 3/8-16 Male TipThe industry standard for attaching and accessorizing larger cameras, monitors, lights, camera cages, and many other in...

Manufactured with the exclusive Matthews Posi-V-Lock design. 1-1/8" female to 5/8" female.

Matthews Junior Double Riser Roller Steel Stand Roller Double Riser is designed for larger lighting fixtures. These stands are built with steel leg...

Matthews Junior Grid Clamp is for mounting larger lighting fixtures securely to overhead grids, car rigs, camera car rails, pipe and speed rail. T...

The Matthews Junior Pipe Clamp has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture at...

*Available for in store pick up only. This item does not ship.The Matthews Junior Steel Triple Riser Rolling Stand - 12.8' is designed for larger l...

Matthews Knuckle Head is the ultimate positioning device. Mounts to a 5/8" male or 1-1/8" female, and is internally threaded 3/8-16 to support stan...

The Matthews Large NOGA Articulating Arm: articulated, multi-jointed arms that are the strongest and most versatile yet in the industry, offering m...

The Matthews Light/Heavy Triple Riser Kit Stand 12.4' is compact and lightweight, ideal for assembling custom lighting kits or replacing your curre...

Matthews Telescoping Hangers are designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to tele...