Light Stands & Grip

The AFFLAC Clamp was designed by Matthews to hold small reflector cards, gels, and foam core mostly for tabletop shooting. Matthews welded the same...

Matthews Baby Pipe Clamps has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture attached,...

Matthews Baby Triple Headers are especially useful when several light fixtures are needed in a relatively small amount of floor space. These header...

The Cheater Adapter has a 5/8' receiver with the Baby Pin set at an angle, to eliminate barn door interference.

Similar to the 3" Baby Plate with one big difference - the pin is mounted at an angle, which eliminates barn door interference when positioning a ...

The Matthews Dutti Dolly Universal Stand Bracket is used to support 0.75 to 2.25" diameter round or square track sections. It can be mounted on sta...

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle desig...

Matthews Foam Core Holder is made with a pivoting ball that locks for easier adjustment, the foam core or bead board are taped onto the flat plate....

The strongest & most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8" ...

The strongest and most popular 2-1/2" grip head in the industry. Black anodized casting offers positive lock in all directions. The grip plates now...

Manufactured with the exclusive Matthews Posi-V-Lock design. 1-1/8" female to 5/8" female.

Matthews Junior Grid Clamp is for mounting larger lighting fixtures securely to overhead grids, car rigs, camera car rails, pipe and speed rail. T...

The Matthews Junior Pipe Clamp has a uniquely designed hook moulded into the clamp which keeps the clamp on the pipe even with a light fixture at...

Matthews Knuckle Head is the ultimate positioning device. Mounts to a 5/8" male or 1-1/8" female, and is internally threaded 3/8-16 to support stan...

Matthews Telescoping Hangers are designed for use with lightweight fluorescent or other fixtures weighing no more than 25 lbs. Engineered to tele...

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Manufactured under license, Ste...

The Matthews Matthellini Clamp with 2" Center Jaw (Silver) provides strong, solid gripping of round, square, or rectangular tubing and many other c...

Matthellini Clamp 3" Center Jaw provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes....

The silver-finished Matthews Matthellini Clamp with 6" End Jaw provides strong, solid gripping of round, square, or rectangular tubing and many...

The MICROgrip Head from Matthews gives you all the same moves and features as a 2 1/2" grip head, but in a more compact (1.25"/32mm diameter) p...

Mini Matthelini 3/8-16 MaleProvides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Feat...

Provides strong, solid gripping of round, square, or rectangular tubing and many other common and irregular shapes. Features ergonomic handle desig...

The Matthews Mini Matthellini Clamp Accessory Tip for the Infinity Arm mounts to either end of the Infinity Arm, increasing its versatility and mou...

Matthews Mounting Plate is often used as the foundation for a monitor platform, a speaker platform or for placing product. The plate has a 5/8" rec...

Small and easy to keep in that emergency kit, the Matthews 6" Pin with Collar can be mounted in a Grip Head, without fear of it slipping through th...

Matthews Quacker Clamp is also known as the Duck Bill or Platypus Clamp. This clamp is ideal for positioning foam core or bead board.

Permits a fixed 90° angle offset from any Baby Pin.

For mounting light fixtures, will fit most motion picture and still photographic instruments.

Matthews 5/8" Snap Pin is for mounting of lighting fixtures. Matthews offers three different sizes to fit most motion picture and still photographi...

Matthews Super Mafer Clamp is strengthened to withstand greater clamping pressure than any other clamp of its kind, the Super Mafer Clamp is now ev...

Strengthened to withstand greater clamping pressure than any other clamp of its kind, the Super Mafer Clamp is now even more diversely effective. T...

Telescoping Hangers have a very substantial pipe clamp to attach to a lighting grid. The pipe clamp has been slightly offset to allow the riser or ...

The Claw by Matthews is designed to safely mount Astera Titan and Helios as well as T12 tube lights using the industry standard 5/8” baby pin. The ...

Ideal for mounting small lighting fixtures. Replaces C-Clamp to allow it to mount into a Super Mafer.

The Nanlite PavoTube Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4''-20 Mount provides an adjustable and transpar...

Multiclamp W-shoe MountOur Shoe Mount Multiclamp allows you to attach your flash to a lightstand and add an umbrella or softbox making it possible ...

Phottix Ar35 Desktop Boom ArmPhottix AR35 boom arm stand is designed for the mounting microphone, LED light and webcam which gears with 1/4” screw ...

Spare stand adapter for the Pro-B Head, ProHead, ProTwin Head, Acute/D4Head, Acute/D4 Twin and former AcuteB Head.

The ProMaster Articulating Arm & Clamp lets you attach an accessory to a flat edge, such as a shelf or table, or to a round object like a tripo...

The ProMaster Articulating Arm & Clamp for Phone lets you attach a phone to a flat edge, such as a shelf or table, or to a round object like a ...

Rock Solid 1" Spring ClampThe Rock Solid “A” Spring Clamp 1″ in non-reflective black with coated handle and tip features spring-operated jaws that ...

RPS Umbrella ShoemountRPS Umbrella Shoemount

SmallRig 15mm Rod Clamp with Arri Rosette 1686 can be attached to any equipment that features a 15mm rod system. Use the rod Arri Rosette and M6 fe...

 Westcott Light Stand Clip is designed to work with Pop-up Backgrounds & Reflectors.Weighing a mere 0.1 lbs (50 g) and small enough to fit in a...

Uneven surfaces, hills, and stairs present challenges when using traditional light stands. The Westcott M6 Multi-Mount Tripod Plate allows you to c...

This clamp is custom-tailored to pair a Scrim Jim frame with a Grip Head for precise and secure mounting to a light stand or c-stand. This mounti...